Nova Display Systems, Inc. | Copyright © 2000-2024 Nova Display Systems Inc. dba NDSI. All Rights Reserved. | Site Index
- Home
- Display Systems and Accessories
- Rod Display Systems
- 10mm Rod Display System / Components
10mm Rod Display System / Components
- Introduction
- Features and Benefits
- Range of Applications
- Inspirational Photos
- Weight Bearing Information
- Materials and Finishes
- Performance and Safety
- Environmental Considerations
- Catalog Pages
- Architectural Specifications
- Installation Guides
Basic Rod Fixing Kits, Rods and Fixing Components
The 10mm Rod Display System offers a range of modular components, including rods, top/bottom rod fixings, wall fixings, panel/shelf support fittings, and other finishing components. This system is suitable for standard ceiling-to-floor, wall-to-wall suspended applications, or other special configurations. Standard threaded rod lengths are available in 1.5m (4′ 11-1/16″), 1m (3′ 3-1/32″), and 0.5m (1′ 7-11/16″). The rods can be adjusted by joining them together for longer lengths or shortened in place during installation. The most popular standard rod suspended fixing kits include rod fixings for ceiling, ceiling-to-floor, or wall-to-wall applications, rods, and decorative end caps. Additionally, panel/shelf side-grips or other specialty supports can be added at your discretion.
KRS-10-0.5M
Ceiling/Top
Fixing Kit with
RD10-0.5M/R
Rod (1 EA)
(Dome End)
0.5M (1′ 7-11/16”)
Length
Fixing Kit with
RD10-0.5M/R
Rod (1 EA)
(Dome End)
0.5M (1′ 7-11/16”)
Length
KRS-10-1M
Ceiling/Top
Fixing Kit with
R1000-10
Rod (1 EA)
and End Cap
1M (3’ 3-3/8”)
Length
Fixing Kit with
R1000-10
Rod (1 EA)
and End Cap
1M (3’ 3-3/8”)
Length
KRS-10-1.5M
Ceiling/Top
Fixing Kit with
R1500-10
Rod (1 EA)
and End Cap
1.5M (4’ 11-1/16”)
Length
Fixing Kit with
R1500-10
Rod (1 EA)
and End Cap
1.5M (4’ 11-1/16”)
Length
KRAS-10-3M
Ceiling-to-Floor
Fixing Kit with
R1500-10
Rods (2 EA)
(Join and Cut-to-Size)
3M (9’ 10”)
Length
Fixing Kit with
R1500-10
Rods (2 EA)
(Join and Cut-to-Size)
3M (9’ 10”)
Length
KRAS-10-4.5M
Ceiling-to-Floor
Fixing Kit with
R1500-10
Rods (3 EA)
(Join and Cut-to-Size)
4.5M (14’ 9”)
Length
Fixing Kit with
R1500-10
Rods (3 EA)
(Join and Cut-to-Size)
4.5M (14’ 9”)
Length
KWM11-10-1M
Wall-to-Wall
Fixing Kit with
R1000-10
Rod (1 EA)
(Cut-to-Size)
1M (3’ 3-3/8”)
Length
Fixing Kit with
R1000-10
Rod (1 EA)
(Cut-to-Size)
1M (3’ 3-3/8”)
Length
KWM11-10-1.5M
Wall-to-Wall
Fixing Kit with
R1500-10
Rod (1 EA)
and End Caps
1.5M (4′ 11-1/16”)
Length
Fixing Kit with
R1500-10
Rod (1 EA)
and End Caps
1.5M (4′ 11-1/16”)
Length
KWM11-10-3M
Wall-to-Wall
Fixing Kit with
R1500-10
Rods (2 EA)
and End Caps
3M (9’ 10”)
Length
Fixing Kit with
R1500-10
Rods (2 EA)
and End Caps
3M (9’ 10”)
Length
Note: 10mm rods are available in standard rod suspension kits with ceiling-overhead, ceiling-to-floor, or wall-to-wall fixings. Ceiling-to-floor suspension kit comes with two or three R1500-10 rods. For taller suspended display applications additional R500-10, R1000-10, or R1500-10 threaded rods can be purchased separately. Rods can be shortened in place during installation. Individual components for use with our standard suspension kits can be found in the component section below.
Rod Fixings and Rods
RS-10*
Rod Top Fixing
Screw-Fit
use with 10mm
Threaded Rods
Screw-Fit
use with 10mm
Threaded Rods
RP-10*
Rod Fixing
Push-Fit w/Set Screw
use with 10mm
Non-Threaded Rods
Push-Fit w/Set Screw
use with 10mm
Non-Threaded Rods
RAS-10*
Rod Top/Bottom
Fixing Kit
use with 10mm
Threaded Rods
Fixing Kit
use with 10mm
Threaded Rods
WM11-10
Rod Wall Fixing
Short Projection
use with 10mm
Rods
Short Projection
use with 10mm
Rods
WM11L-10
Rod Wall Fixing
Long Projection
use with 10mm
Rods
Long Projection
use with 10mm
Rods
R500-10
10mm Rod Threaded
M6 Right-Hand
0.5M (1′ 7-11/16”)
Long
M6 Right-Hand
0.5M (1′ 7-11/16”)
Long
R1000-10
10mm Rod Threaded
M6 Right-Hand
1.0M (3′ 3-3/8”)
Long
M6 Right-Hand
1.0M (3′ 3-3/8”)
Long
R1500-10
10mm Rod Threaded
M6 Right-Hand
1.5M (4′ 11-1/16”)
Long
M6 Right-Hand
1.5M (4′ 11-1/16”)
Long
REC-10
Decorative
End Cap
for 10mm Rods
Requires Threads
End Cap
for 10mm Rods
Requires Threads
HDS
Heavy-Duty
Base Support
50mm (2′′)
Diameter
Base Support
50mm (2′′)
Diameter
Note: Use RS-10 and RAS-10 fixings with 10mm right-hand threaded rods — Join two or more of R500-10, R1000-10, or R1500-10 threaded rods to make any length and cut to size. Once screwed together the rods appear continuous. Use RP-10 fixing with 10mm non-threaded rods for short run applications or for wall-mount rod stabilizer supports (not intended for use with ceiling suspended applications). REC-10 end cap requires the rods to have threaded ends (fits on either male or female threaded end).
Specialized Accessories and Components
10mm rod system comes with right-hand M6 threaded rods. With a male thread at one end and a female at the other, the rods allow to be screwed into the top fixing or joined together to make longer lengths. Once screwed together the rods look like a continuous rod. Cut the rod with a hack saw at the bottom to achieve the overall required length.
Use WM11-10 or WM11L-10 fixings to mount 10mm rods onto wall to create stylish interior signage and wall displays such as hook-on acrylic pockets — just insert your print and hook on in the desired position, easy to change for displaying all types of information. Use also with RG01-10 and RG02-10 side-grips to support panels between horizontal rods.
Use to stabilize ceiling-to-floor suspended rods — not intended for use as a weight support structure. Standard wall projecting rod stabilizer comes in two sizes to accommodate for 24mm (7/8”) and 48mm (1-7/8”) spacing. Customizable kits use 6mm diameter rods that can be cut to any size — adjusted and shortened in place during installation.
Standard and Multi-Position Supports — Panel and Shelf Applications
Supplied in a range of single and double-sided clamp supports for holding panels and shelves, top panel supports for hanging overhead signs, top/bottom supports for gripping onto front mounted panels, and multi-position swivel supports for holding angled presentations. Available in a few standard sizes to support 1/4”, 3/8” and 1/2” thick panels or shelves. Use multi-position swivel supports for applications that require an angled orientation. These fittings are adjustable to any angle and can be locked into position.
Side Clamp
Support
for Panels
Support with
Stud-Cap
for Panels
Top/Bottom
Support
for Panels
Support with
Stud-Cap for Panels
on Horizontal Rods
Side Clamp
Support
for Shelves
Multi-Position
Clamp Support
for Panels/Shelves
Multi-Position
Support for
Wooden Shelves
Support for
Drilled/Slotted
Wooden Shelf
Side-Grip Supports for Panels and Shelves
RG01-10
Side Support
Single
up to 7mm (1/4″)
Thick Panels
Single
up to 7mm (1/4″)
Thick Panels
RG02-10
Side Support
Double
up to 7mm (1/4″)
Thick Panels
Double
up to 7mm (1/4″)
Thick Panels
RG14-10
Side Support
Single
up to 12.5mm (1/2″)
Thick Panels
Single
up to 12.5mm (1/2″)
Thick Panels
RG06-10
Side Support
Single
up to 7mm (1/4″)
Thick Shelves
Single
up to 7mm (1/4″)
Thick Shelves
RG07-10
Side Support
Double
up to 7mm (1/4″)
Thick Shelves
Double
up to 7mm (1/4″)
Thick Shelves
RG15-10
Side Support
Single
up to 12.5mm (1/2″)
Thick Shelves
Single
up to 12.5mm (1/2″)
Thick Shelves
RS01-10
Support
for Drilled Shelf
up to 25mm (1″)
Thick Shelves
for Drilled Shelf
up to 25mm (1″)
Thick Shelves
Supports for Panels with Holes
Use with pre-drilled panels. Require panel hole size diameter of 6mm (15/64″) to accommodate for M4 threaded stud.
RS13-10
Support w/Stud
Single
up to 7mm (1/4″)
M4 Stud
Single
up to 7mm (1/4″)
M4 Stud
RS23-10
Support w/Stud
Double
up to 7mm (1/4″)
M4 Stud
Double
up to 7mm (1/4″)
M4 Stud
RS13-10/S-3/8
Support w/Stud
Single
up to 10mm (3/8″)
M4 Stud
Single
up to 10mm (3/8″)
M4 Stud
RS23-10/S-3/8
Support w/Stud
Double
up to 10mm (3/8″)
M4 Stud
Double
up to 10mm (3/8″)
M4 Stud
RS13-10/S-1/2
Support w/Stud
Single
up to 12mm (1/2″)
M4 Stud
Single
up to 12mm (1/2″)
M4 Stud
RS13-10/S-1/2
Support w/Stud
Double
up to 12mm (1/2″)
M4 Stud
Double
up to 12mm (1/2″)
M4 Stud
Multi-Position Supports for Panels/Shelves and Rods
Use for a variety of applications that require an angled placement or a custom orientation. Adjustable to any angle. Can be locked into position.
RG11-10
Multi-Position
Support Single
up to 7mm (1/4″)
Support Single
up to 7mm (1/4″)
RG21-10
Multi-Position
Support Double
up to 7mm (1/4″)
Support Double
up to 7mm (1/4″)
RG13-10
Multi-Position
Support Single
up to 10mm (3/8″)
Support Single
up to 10mm (3/8″)
RG23-10
Multi-Position
Support Double
up to 10mm (3/8″)
Support Double
up to 10mm (3/8″)
RS11-10
Multi-Position
Support Single
up to 25mm (1″)
Support Single
up to 25mm (1″)
RS21-10
Multi-Position
Support Double
up to 25mm (1″)
Support Double
up to 25mm (1″)
RG12-10
Multi-Position
Support Single
up to 10mm (3/8″)
Support Single
up to 10mm (3/8″)
RG22-10
Multi-Position
Support Double
up to 10mm (3/8″)
Support Double
up to 10mm (3/8″)
RR01-10
Multi-Position
Support for Rod
for 10mm Rods
Support for Rod
for 10mm Rods
RR01-10/6
Multi-Position
Support for Rod
for 6mm Rods
Support for Rod
for 6mm Rods
Note: RG12-10 and RG21-10 multi-position supports are intended for supporting 7mm (1/4″) thick panels. These supports can accommodate up to 3/8″ thick substrates but will require shorter P10/6mm set screws that can be purchased separately.
Specialty Supports — Frame and Showcase Presentations
Use for mounting wood panels and shelves, display showcases, aluminum frames, hanging clothes rails, graphic holders, horizontal rods for banners/fabrics, picture frames, wine bottles, or any item fitted with P02 boss.
Support with Boss
for Wooden
Panel/Shelf
Support with Boss
for Graphic
Holder
Support with Boss
for Hanging
Rail
Support for
Aluminum
Frame
Hook Support
for Picture
Frame
Support for
6mm and 10mm
Horizontal Rods
Support for
Fixed or Adjustable
Rod
Rod Support for
for Wooden
Shelf
Specialty Supports
RS03-10
Support Single
w/P02 Boss
for Wooden
Panels and Shelves
w/P02 Boss
for Wooden
Panels and Shelves
RS04-10
Support Double
w/P02 Boss
for Wooden
Panels and Shelves
w/P02 Boss
for Wooden
Panels and Shelves
P02
Boss
for Supports
use with
#10 Screw
for Supports
use with
#10 Screw
RS05-10
Support Single
for 6mm Rod
for Hanging
Horizontal Rods
for 6mm Rod
for Hanging
Horizontal Rods
RS06-10
Support Double
for 6mm Rod
for Hanging
Horizontal Rods
for 6mm Rod
for Hanging
Horizontal Rods
KRS03-10/CT01
Support Single
w/CT01 Toggle
for Aluminum
Frames
w/CT01 Toggle
for Aluminum
Frames
KRS04-10/CT01
Support Double
w/CT01 Toggle
for Aluminum
Frames
w/CT01 Toggle
for Aluminum
Frames
KRS03-10/CT12
Support Single
w/CT12 Boss
for Rod-to-Cable
Hanging
w/CT12 Boss
for Rod-to-Cable
Hanging
KRS04-10/CT12
Support Double
w/CT12 Boss
for Rod-to-Cable
Hanging
w/CT12 Boss
for Rod-to-Cable
Hanging
RS12-10
Picture
Hook/Support
for any
Hanging Item
Hook/Support
for any
Hanging Item
Rails/Tracks and Installation Accessories
Supplied in a range of components and accessories such as aluminum rails/tracks for standard ceiling-to-floor or wall-to-wall cable suspended applications, wall brackets, quick-fit brass toggles, power connectors and isolators, decorative support plates, etc. Tracks are available in 4, 6, or 8 feet length. Custom sizes are available upon request.
Rebate and Threshold
Channel for
Ceiling/Floor
Single or Double-
Sided Rail/Track
for Ceiling/Floor
Wall Brackets
for Cable/Rod
and Track Fixing
Rail/Track Toggles
for Cable/Rod
Suspensions
Graphic Holders
and Hanging
Rails
6-10mm Rods
for
Sundry Use
Heavy-Duty
Wall Brackets
for Cable/Rod Systems
Hardware /
Set Screws and Anchros
Rails and Toggles
AC
Rebate Channel
for Ceilings
14.5mm (7/16”) x
19mm (3/4”) Section
for Ceilings
14.5mm (7/16”) x
19mm (3/4”) Section
ACT
Threshold Channel
for Floors
8mm (5/16”) x
38mm (1-1/2”) Section
for Floors
8mm (5/16”) x
38mm (1-1/2”) Section
PH1028
Single-Sided
Rail/Track
28mm (1-1/8”) x
19mm (3/4”) Section
Rail/Track
28mm (1-1/8”) x
19mm (3/4”) Section
PH1035
Double-Sided
Rail/Track
35mm (1-3/8”) x
19mm (3/4”) Section
Rail/Track
35mm (1-3/8”) x
19mm (3/4”) Section
PH1005
Double-Sided
Rail/Track
45mm (1-13/16") x
19mm (3/4”) Section
Rail/Track
45mm (1-13/16") x
19mm (3/4”) Section
MSB-25
Wall
Bracket
for Mounting
Double-Sided Rails
Bracket
for Mounting
Double-Sided Rails
MDB
Triangular
Wall Bracket
for Cable/Rod
Attachment
Wall Bracket
for Cable/Rod
Attachment
PC01-Q
Quick-Fit
Toggle
for 10mm Rod-to-Rail
Attachment
Toggle
for 10mm Rod-to-Rail
Attachment
PA8
Toggle
End-Fit
for Cable-to-Rail
Attachment
End-Fit
for Cable-to-Rail
Attachment
PA9
Toggle
Side-Fit
for Cable-to-Rail
Attachment
Side-Fit
for Cable-to-Rail
Attachment
Note: Aluminum rails are offered in lengths of 4, 6, or 8 feet, with custom sizes available upon request. For installation, rail/track systems must be securely mounted to a solid structure or blocking. This includes attaching tracks to ceiling struts, structures above the ceiling line, or wall studs. The spacing for anchoring depends on the track’s sectional size, requiring anchors at least every 12 inches for ceiling installations and every 32 inches for wall applications. The overall durability and capacity of the assembly are contingent upon the secure attachment of the anchors to the ceiling or wall. The total weight the display can support is determined by both the strength of the individual anchors and the number of mounting points used.
Other Accessories
R150P
6mm Rod
Non-Threaded
0.15M (5-7/8”)
Long
Non-Threaded
0.15M (5-7/8”)
Long
R250P
6mm Rod
Non-Threaded
0.25M (9-7/8”)
Long
Non-Threaded
0.25M (9-7/8”)
Long
R150-S
6mm Rod
Threaded
0.15M (5-7/8”)
Long
Threaded
0.15M (5-7/8”)
Long
HRAG400R
Graphic Holder
w/Gripper
up to 80 points
thick (3/32′′, 2 mm)
w/Gripper
up to 80 points
thick (3/32′′, 2 mm)
HR32R
Clothing
Hanging Rail
32mm (1-1/4”)
Diameter
Hanging Rail
32mm (1-1/4”)
Diameter
P01
Decorative
Support Plate
50mm (2′′)
Diameter
Support Plate
50mm (2′′)
Diameter
CD-10
Decorative
Cover Disk
25mm (1′′)
Diameter
Cover Disk
25mm (1′′)
Diameter
RD10-0.5M/R
10mm Rod
Threaded
0.5M (1′ 7-11/16”)
Long / Dome End
Threaded
0.5M (1′ 7-11/16”)
Long / Dome End
Note: Use the R150P, R250P, and R150-S to create custom size projection rods used with Wall-Mount Rod Stabilizer Assembly (more info is available in the “Specialized Accessories and Components” section above). R150-S threaded rods can only be used with RS fixings. HRAG400R and HR32R come with P02 boss attached and require the RS03-10/RS04-10 fittings for mounting to rods. P01 Decorative Support Plate is compatible with WM11-10 and WM11L-10 wall fixings and can be used to enhance their appearance.
Use the info/poster display accessories to display information, certificates, photos, posters, brochures, magazines, and other promotional material. Cable/rod suspended holders are relatively quick and easy to install and update… Read More ❯
Acrylic Easy Access Info/Poster Holders
Acrylic Single/Multi-Pocket Magazine Holders
A wide range of acrylic resin sheets — available in clear, non-glare, frost, color, textured, and natural decors for use with cable/rod suspension systems. Use to create graphic panels, privacy screens, and partitions… Read More ❯
Acrylic Frameless Panels for Posters and Graphics
Resin Panels for Partitions and Screens
Shelves and showcases are made of clear, frost, or satinice color acrylic and are intended for use in a variety of cable/rod suspended applications. Use to display collectibles, promotional products, or lightweight merchandise… Read More ❯
Acrylic and Tempered Glass Shelves
Open/Locking Acrylic Showcase Displays
Display Solutions & Ideas
Graphic Panels and Banners
Cable/rod suspended graphic displays are an excellent addition to any retail store, showroom, lobby, or corporate office.
Info/Photo Displays
Vertical and horizontal wall mounted rod system for displaying photos, cards and certificates in a professional and secure way.
Decorative Screens and Dividers
Cable/rod suspended architectural screens, decorative wall panels, and room dividers available in a wide range of finishes.
Suspended/Floating Shelves
Ideal for displaying collectibles, merchandise and promotional products in windows, inside glass cabinets, or interiors.