Nova Display Systems, Inc. | Copyright © 2000-2024 Nova Display Systems Inc. dba NDSI. All Rights Reserved. | Site Index
1.5mm Cable Display System / Components
- Introduction
- Features and Benefits
- Range of Applications
- Inspirational Photos
- Weight Bearing Information
- Materials and Finishes
- Performance and Safety
- Environmental Considerations
- Catalog Pages
- Architectural Specifications
- Installation Guides
Basic and Special Cable Fixing Kits
The 1.5mm Cable Display System is available in both standard and special pre-configured suspension kits, which include ready-crimped cables, fixing plates, tensioners, and essential top/bottom or adjustable fixings. These kits are ideal for typical ceiling-to-floor and wall-to-wall suspensions, as well as unique configurations tailored to your needs. Our standard kits come with cables in lengths of 3 meters (9′ 10″) or 4 meters (13′ 1-1/2″), which can be conveniently adjusted or trimmed on-site during installation. Should your project require it, we also offer kits with extended cable lengths of up to 8 meters (26′ 4″) or more upon request.
C2
Ceiling-
Overhead
2M (6’ 5-3/4”)
Length
Overhead
2M (6’ 5-3/4”)
Length
KC2-CG05
Ceiling-Overhead
w/Top Clamp
2M (6’ 5-3/4”)
Length
w/Top Clamp
2M (6’ 5-3/4”)
Length
CA4
Ceiling-
to-Floor
4M (13’ 1-1/2”)
Length
to-Floor
4M (13’ 1-1/2”)
Length
CQQ
Track-Mount
w/Quick Fit Toggle
4M (13’ 1-1/2”)
Length
w/Quick Fit Toggle
4M (13’ 1-1/2”)
Length
CWW
Wall-to-
Wall
3M (9’ 10”)
Length
Wall
3M (9’ 10”)
Length
CCW
Ceiling-
to-Wall
3M (9’ 10”)
Length
to-Wall
3M (9’ 10”)
Length
CWF
Wall-to-
Floor
3M (9’ 10”)
Length
Floor
3M (9’ 10”)
Length
C101-4M
Ceiling-
to-Floor
4M (13’ 1-1/2”)
Length
to-Floor
4M (13’ 1-1/2”)
Length
C140-4M
Adjustable Angle
Ceiling-to-Floor
4M (13’ 1-1/2”)
Length
Ceiling-to-Floor
4M (13’ 1-1/2”)
Length
C160-4M
Adjustable Angle
Top and Bottom
4M (13’ 1-1/2”)
Length
Top and Bottom
4M (13’ 1-1/2”)
Length
Note: C140-4M and C160-4M Cable Suspension Sets include Ball-Joint Swivel Coupling Fixings with 38mm (1-1/2″) Dia. Bases — Optional Base Supports in 50mm diameter are also available. Cable Projection from Wall — 65mm (2-1/2″). Cable Suspension Sets with longer cables or additional crimped cables up to 8 meter (26′ 4″) or more can be supplied at your request.
Specialized Accessories and Components
Optional Base Supports are compatible with C100-2M and C101-4M cable suspension sets only. Bases are available in 25mm (1”), 38mm (1-1/2”), and 50mm (2”) diameters. These bases can fit onto both ends of cable set — top fixing and bottom floor-tensioner. Use the CB-50 base support to suspend heavier applications (require mounting to studs).
Double-cable suspension kits come in ceiling-to-wall, wall-to-wall, or wall-to-floor configurations. Standard kits are provided with 3 meter (9’-10”) long cables that can be adjusted and shortened in place during installation. The projecting rods come in two sizes to accommodate for 150mm (5-7/8”) and 300mm (11-7/8”) cable centers (back-to-front).
Adjustable Angle Fixings come with ball-joint swivel coupling and 38mm (1-1/2”) or 50mm (2”) diameter base supports that can be adjusted to any angle. Compatible with C100-2M and C101-4M cable suspension sets only. Use with applications that require mounting the cable at an angle such as suspending from sloped ceilings (cathedral or vaulted) or wall-to-wall.
Standard and Multi-Position Supports — Panel and Shelf Applications
Supplied in a range of single and double-sided clamp supports for holding panels and shelves, top panel supports for hanging overhead signs, top/bottom supports for gripping onto front mounted panels, and multi-position swivel supports for holding angled presentations. Available in a few standard sizes to support 1/4”, 3/8” and 1/2” thick panels or shelves. Use multi-position swivel supports for applications that require an angled orientation. These fittings are adjustable to any angle and can be locked into position.
Top Clamp
Support
for Panels
Side Clamp
Support
for Panels
Support with
Stud-Cap
for Panels
Top/Bottom
Support
for Panels
Side Clamp
Support
for Shelves
Multi-Position
Clamp Support
for Panels/Shelves
Multi-Position
Support for
Wooden Shelves
Support for
Drilled/Slotted
Shelf
Side-Grip Supports for Panels
CG03
Side Support
Single
up to 4mm (5/32″)
Single
up to 4mm (5/32″)
CG04
Side Support
Double
up to 4mm (5/32″)
Double
up to 4mm (5/32″)
CG01
Side Support
Single
up to 7mm (1/4″)
Single
up to 7mm (1/4″)
CG02
Side Support
Double
up to 7mm (1/4″)
Double
up to 7mm (1/4″)
CP103
Side Support
Single
up to 10mm (3/8″)
Single
up to 10mm (3/8″)
CP104
Side Support
Double
up to 10mm (3/8″)
Double
up to 10mm (3/8″)
CG14
Side Support
Single
up to 12.5mm (1/2″)
Single
up to 12.5mm (1/2″)
CG05
Top/Overhead
Support
up to 7mm (1/4″)
Support
up to 7mm (1/4″)
CG05-10
Top/Overhead
Support
up to 12.5mm (1/2″)
Support
up to 12.5mm (1/2″)
CG09
Top/Bottom
Support
up to 7mm (1/4″)
Support
up to 7mm (1/4″)
Supports for Panels with Holes
Use with pre-drilled panels. Require panel hole size diameter of 6mm (15/64″) to accommodate for M4 threaded stud.
CS13
Support w/Stud
Single
up to 7mm (1/4″)
M4 Stud
Single
up to 7mm (1/4″)
M4 Stud
CS23
Support w/Stud
Double
up to 7mm (1/4″)
M4 Stud
Double
up to 7mm (1/4″)
M4 Stud
CS13/S-3/8
Support w/Stud
Single
up to 10mm (3/8″)
M4 Stud
Single
up to 10mm (3/8″)
M4 Stud
CS23/S-3/8
Support w/Stud
Double
up to 10mm (3/8″)
M4 Stud
Double
up to 10mm (3/8″)
M4 Stud
CS13/S-1/2
Support w/Stud
Single
up to 12mm (1/2″)
M4 Stud
Single
up to 12mm (1/2″)
M4 Stud
CS23/S-1/2
Support w/Stud
Double
up to 12mm (1/2″)
M4 Stud
Double
up to 12mm (1/2″)
M4 Stud
Multi-Position Supports for Panels/Shelves and Rods
Use for a variety of applications that require an angled placement or a custom orientation. Adjustable to any angle. Can be locked into position.
CG11
Multi-Position
Support Single
up to 7mm (1/4″)
Support Single
up to 7mm (1/4″)
CG21
Multi-Position
Support Double
up to 7mm (1/4″)
Support Double
up to 7mm (1/4″)
CG13
Multi-Position
Support Single
up to 10mm (3/8″)
Support Single
up to 10mm (3/8″)
CG23
Multi-Position
Support Double
up to 10mm (3/8″)
Support Double
up to 10mm (3/8″)
CS11
Multi-Position
Support Single
up to 25mm (1″)
Support Single
up to 25mm (1″)
CS21
Multi-Position
Support Double
up to 25mm (1″)
Support Double
up to 25mm (1″)
CG12
Multi-Position
Support Single
up to 10mm (3/8″)
Support Single
up to 10mm (3/8″)
CG22
Multi-Position
Support Double
up to 10mm (3/8″)
Support Double
up to 10mm (3/8″)
CS07
Multi-Position
Support for Rod
for 6mm Rods
Support for Rod
for 6mm Rods
Specialty Supports — Frame and Showcase Presentations
Used for mounting wood panels and shelves, display showcases, aluminum frames, hanging clothes rails, graphic holders, horizontal rods for banners/fabrics, picture frames, wine bottles, or any item fitted with P02 boss.
Support with Boss
for Wooden
Panel/Shelf
Support with Boss
for Graphic
Holder
Support with Boss
for Hanging
Rail
Support for
Aluminum
Frame
Hook Support
for Picture
Frame
Support for
6mm and 10mm
Horizontal Rods
Support for
Fixed or Adjustable
Rod
Rod Support for
for Wooden
Shelf
Specialty Supports
CS03
Support Single
w/P02 Boss
for Wooden
Panels and Shelves
w/P02 Boss
for Wooden
Panels and Shelves
CS04
Support Double
w/P02 Boss
for Wooden
Panels and Shelves
w/P02 Boss
for Wooden
Panels and Shelves
P02
Boss
for Supports
use with
#10 Screw
for Supports
use with
#10 Screw
CS05
Support Single
for 6mm Rod
for Hanging
Horizontal Rods
for 6mm Rod
for Hanging
Horizontal Rods
CS06
Support Double
for 6mm Rod
for Hanging
Horizontal Rods
for 6mm Rod
for Hanging
Horizontal Rods
CS09
Support
for 6mm Rod
for Hanging
Horizontal Rods
for 6mm Rod
for Hanging
Horizontal Rods
KCS03/CT01
Support Single
w/CT01 Toggle
for Aluminum
Frames
w/CT01 Toggle
for Aluminum
Frames
KCS04/CT01
Support Double
w/CT01 Toggle
for Aluminum
Frames
w/CT01 Toggle
for Aluminum
Frames
CF125
Picture
Hook/Support
for any
Hanging Item
Hook/Support
for any
Hanging Item
KCS03/CT12
Support Single
w/CT12 Boss
for Cable-to-Cable
Hanging
w/CT12 Boss
for Cable-to-Cable
Hanging
Rails/Tracks and Installation Accessories
Supplied in a range of components and accessories such as aluminum rails/tracks for standard ceiling-to-floor or wall-to-wall cable suspended applications, wall brackets, quick-fit brass toggles, power connectors and isolators, decorative support plates, etc. Tracks are available in 4, 6, or 8 feet length. Custom sizes are available upon request.
Rebate and Threshold
Channel for
Ceiling/Floor
Single or Double-
Sided Rail/Track
for Ceiling/Floor
Wall Brackets
for Cable/Rod
and Track Fixing
Rail/Track Toggles
for Cable/Rod
Suspensions
Graphic Holders
and Hanging
Rails
6-10mm Rods
for
Sundry Use
Heavy-Duty
Base Supports/
Wall Plugs
Replacement
Cable with Top
Crimp
Rails and Toggles
AC
Rebate Channel
for Ceilings
14.5mm (7/16”) x
19mm (3/4”) Section
for Ceilings
14.5mm (7/16”) x
19mm (3/4”) Section
ACT
Threshold Channel
for Floors
8mm (5/16”) x
38mm (1-1/2”) Section
for Floors
8mm (5/16”) x
38mm (1-1/2”) Section
PH1028
Single-Sided
Rail/Track
28mm (1-1/8”) x
19mm (3/4”) Section
Rail/Track
28mm (1-1/8”) x
19mm (3/4”) Section
PH1035
Double-Sided
Rail/Track
35mm (1-3/8”) x
19mm (3/4”) Section
Rail/Track
35mm (1-3/8”) x
19mm (3/4”) Section
PH1005
Double-Sided
Rail/Track
45mm (1-13/16") x
19mm (3/4”) Section
Rail/Track
45mm (1-13/16") x
19mm (3/4”) Section
MSB-25
Wall
Bracket
for Mounting
Double-Sided Rails
Bracket
for Mounting
Double-Sided Rails
PC01-Q
Quick-Fit
Toggle
for Cable-to-Rail
Attachment
Toggle
for Cable-to-Rail
Attachment
QFT/SS
Quick-Fit
Toggle
for Cable-to-Rail
Attachment
(heavy-duty)
Toggle
for Cable-to-Rail
Attachment
(heavy-duty)
PA8
Toggle
End-Fit
for Cable-to-Rail
Attachment
End-Fit
for Cable-to-Rail
Attachment
PA9
Toggle
Side-Fit
for Cable-to-Rail
Attachment
Side-Fit
for Cable-to-Rail
Attachment
Note: Aluminum rails are offered in lengths of 4, 6, or 8 feet, with custom sizes available upon request. For installation, rail/track systems must be securely mounted to a solid structure or blocking. This includes attaching tracks to ceiling struts, structures above the ceiling line, or wall studs. The spacing for anchoring depends on the track’s sectional size, requiring anchors at least every 12 inches for ceiling installations and every 32 inches for wall applications. The overall durability and capacity of the assembly are contingent upon the secure attachment of the anchors to the ceiling or wall. The total weight the display can support is determined by both the strength of the individual anchors and the number of mounting points used.
Other Accessories
BC8
Replacement Cable
w/Top Crimp
8M (26′-2′′)
Long
w/Top Crimp
8M (26′-2′′)
Long
R500P
6mm Rod
Non-Threaded
0.5M (1′ 7-11/16′′)
Long
Non-Threaded
0.5M (1′ 7-11/16′′)
Long
R1000P
6mm Rod
Non-Threaded
1.0M (3′ 3-3/8′′)
Long
Non-Threaded
1.0M (3′ 3-3/8′′)
Long
R1500
6mm Rod
Threaded
1.5M (4′ 11-1/16′′)
Long
Threaded
1.5M (4′ 11-1/16′′)
Long
HRAG400R
Graphic Holder
w/Gripper
up to 80 points
thick (3/32′′, 2 mm)
w/Gripper
up to 80 points
thick (3/32′′, 2 mm)
HR32C
Clothing
Hanging Rail
32mm (1-1/4”)
Diameter
Hanging Rail
32mm (1-1/4”)
Diameter
CB-25
Base
Support
25mm (1′′)
Diameter
Support
25mm (1′′)
Diameter
CB-38
Base
Support
38mm (1-1/2′′)
Diameter
Support
38mm (1-1/2′′)
Diameter
CB-50
Heavy-Duty
Base Support
50mm (2′′)
Diameter
Base Support
50mm (2′′)
Diameter
HDS
Heavy-Duty
Base Support
50mm (2′′)
Diameter
Base Support
50mm (2′′)
Diameter
Note: HDS Heavy-Duty Base Support is compatible with CA4 cable suspension set and can be used to support heavier loads (*use with the top fixing only — can not be mounted at the bottom of cable). Use CB-Series Optional Base Supports with C100-2M and C101-4M cable suspension sets by replacing the CB-ST standard base support included with each set. CB-Series Base Supports can be attached at the top and bottom of these cable sets.
LED Backlit Display Frames
Acrylic Eassy Access Info/Poster Holders
Literature holders are available in single or multi-pocket styles and come in either portrait or landscape orientation. Use to display publications, leaflets, flyers, brochures, magazines, books, or other promotional material… Read More ❯
Acrylic Single/Multi-Pocket Brochure Holders
Angled/Sloped Acrylic Shelves
Shelves and showcases are made of clear, frost, or satinice color acrylic and are intended for use in a variety of cable suspended applications. Use to display collectibles, promotional products, or lightweight merchandise… Read More ❯
Acrylic and Tempered Glass Shelves
Open/Locking Acrylic Showcase Displays
Display Solutions & Ideas
LED Light Pockets
Incredibly bright, slim acrylic poster frame with glowing edges. It will make your window or wall displays stand out.
Easy Access Poster Displays
Cable suspended poster information displays for walls and windows. Provides a quick and easy way to change information.
Literature/Information Displays
Cable/rod suspended or wall mounted displays for brochures, catalogs, magazines and other promotional materials.
Suspended/Floating Shelves
Ideal for displaying collectibles, merchandise and promotional products in windows, inside glass cabinets, or interiors.