Cable/Rod Suspended Easy Access Poster Displays / Customizations

To customize your own easy-access acrylic poster display follow the links and steps highlighted below. Start by selecting the cable/rod configuration that would best suit your needs, then choose the necessary panel supports to hold the easy access poster holders or other accessories. Select the size of easy access acrylic holder that fits your poster format. Add optional logo/info panels or literature holders at the bottom of your display to fit the same cable width. Other cable/rod components and accessories such as ceiling, floor and wall tracks are available to ensure additional design freedom and flexibility during installation. Scale up your design project by mixing various size posters and literature, and by adding signs with permanent text or graphics. You can always ask for help by contacting a customer service representative.

Cable Fixings & Supports

CA4 Ceiling to Floor Cable Suspension Kit for 1.5 mm Cable Display System

CA4


Ceiling-to-Floor Cable Suspension Kit

CWW Wall-to-Wall Cable Suspension Kit

CWW


Wall-to-Wall Cable Suspension Kit

C101-4 Ceiling-to-Floor Cable Suspension Kit

C101-4*


Ceiling-to-Floor Cable Suspension Kit

C113-3 Wall-to-Wall Cable Suspension Kit

C113-3*


Wall-to-Wall Cable Suspension Kit

CQQ Quick-Fit Cable Suspension Kit

CQQ


Quick-Fit Cable Suspension Kit for Rails/Tracks

CG01 cable vertical support single sided for panels for 1.5 mm Cable Display System

CG01


Panel Support up to 7mm (1/4″)

CG02 cable vertical support double sided for panels for 1.5 mm Cable Display System

CG02


Panel Support up to 7mm (1/4″)

CG03 cable vertical support single sided for panels for 1.5 mm Cable Display System

CG03


Panel Support up to 4mm (5/32″)

CG04 cable vertical support double sided for panels for 1.5 mm Cable Display System

CG04


Panel Support up to 4mm (5/32″)

CG09 cable top/bottom support for panels for 1.5 mm Cable Display System

CG09


Panel Support up to 7mm (1/4″)

CG12 cable top bottom multi-position support for panels for 1.5 mm Cable Display System

CG12


Panel Support up to 7mm (1/4″)

CS13 cable support for panels with holes for 1.5 mm Cable Display System

CS13


Panel Support w/Stud for 6mm (15/64″)

*Cable Sets with compact fixings — use with Interchangeable Base Supports. Use CG03 and CG04 cable fittings to support smaller size easy access acrylic holders. Use CG01 and CG02 cable fittings to support larger size easy access acrylic holders (we recommend 18” x 24” and up) and leaflet dispensers. Use CG09, CG12 and CS13 cable fittings to support logo or info panels above or below the easy access acrylic holders. CG09 and CG12 does not require drilling but panel needs to be wider than the distance between cable centers.

Rod Fixings & Supports

RAS Ceiling to Floor Rod Suspension Kit for 6 mm Rod Display System

RAS


Top/Bottom Rod Fixing Kit

RS Ceiling-Overhead Rod Suspension Kit for 6 mm Rod Display System

RS


Top Rod Fixing / Screw-Fit

RP Rod Suspension Kit for 6 mm Rod Display System

RP*


Rod Fixing / Push-Fit with Grub Screw

WM11 Wall Fixing Support for 6mm rods

WM11


Wall-to-Wall Rod Fixing

P01 Decorative Support Plate for Cable/Rod Fixings

P01


Deco Support Plate

REC Decorative-End-Cap for 6 mm Rod Display System

REC


Deco End Cap for Rods

R1500 Threaded 1.5m (4′ 11-1/16″) Long Rod for 6 mm Rod Display System

R1500


1.5M (4’11-1/16″) Long Rod Threaded

R500 Threaded 0.5m (1′ 7-11/16″) Long Rod for 6 mm Rod Display System

R500


0.5M (1’7-1/16″) Long Rod Threaded

RG01 rod vertical support for panels

RG01


Panel Support up to 7mm (1/4″)

RG02 rod vertical support double for panels

RG02


Panel Support up to 7mm (1/4″)

RG12 rod top-bottom multi position support for panels

RG12


Panel Support up to 7mm (1/4″)

RS13 rod support for panels with holes

RS13


Panel Support w/Stud for 6mm (15/64″)

*Use RP and RS rod fixing combination to suspend short rods that do not require a spring tensioner at the bottom — ideal for window frame assemblies that span less than 60” in length. Use RS13 and RG12 (adjustable to any angle) rod fittings to support logo or info panels above or below the easy access acrylic holders. RS13 requires all panels to be drilled. RG12 does not require drilling but panel needs to be wider than the distance between cable centers.

Installation Accessories for Cables/Rods

PH1006-AC Aluminum Channel / Horizontal Extrusion for use as rail/rack for cable/rod suspended displays

AC*


Rebate Channel for Ceilings

155-ATC Aluminum Channel / Horizontal Extrusion for use as rail/rack for cable/rod suspended displays

ACT*


Threshold Channel for Floors

PH1028 Aluminum Profile / Horizontal Extrusion for modular stand assembly or cable/rod suspensions

PH1028*


28mm (1-1/8”) Section Single-Sided Track

PH1005 Aluminum Profile / Horizontal Extrusion for modular stand assembly or cable/rod suspensions

PH1005*


45mm (1-13/16”) Section Double-Sided Track

FF370-104 Aluminum Adhesive End Cap for PH1005 for Cable/Rod Display System

370 104


Aluminum End Cap

FF390-116 Plastic End Cap for PH1005 for Cable/Rod Display System

390 116


Plastic End Cap

PA8 Toggle for channel fixing for Cable/Rod Display System

PA8


Toggle / End-Fit

PA9 Toggle for channel fixing for Cable/Rod Display System

PA9


Toggle / Side-Fit

AT toggle for 1.5 mm Cable Display System

AT


Toggle

MSB-25 wall bracket for Cable/Rod Display System

MSB-25


Wall Bracket

*Tracks are available in 4, 6, or 8 feet lenght. A Freight & Handling Surcharge is applied per order/shipment on all Oversize Items (84” and longer).
Acrylic Easy Access Poster Holders by Nova Display Systems

Acrylic Easy Access Poster Holders

Cable/rod suspended easy access poster holders are designed as 1/8 inch thick clear acrylic pocket/envelope style frames for use with posters and photos. They are available in portrait or landscape configuration and in a range of sizes to hold letter, legal, or other standard poster-insert formats. They work with standard posters and prints up to 135 gsm or 1mm (1/32”) thick.

READ MORE ❯

Acrylic Literature Holders

Acrylic literature holders/leaflet dispensers are available in single or multi-pocket configurations and in a few popular sizes to accommodate for tri-fold or letter format literature display. The 1/4 inch thick back panel enable for cable/rod display fittings or edge-grip supports to attach for mounting purpose. Each leaflet pocket is about 1.5 inch deep and can hold up to 160 sheets of paper 75 gsm thick.

READ MORE ❯

Cable/Rod Suspended Acrylic Literature Holders / Nova Display Systems, Inc.
Plaques & Logo Panels / Nova Display Systems, Inc.

Customized Signs & Logo/Info Panels

Enhance your standard display kit by adding a logo/info panel. We provide personalized direct printed or laser engraved logo panels and custom signs. We use a variety of materials including clear, frosted or textured acrylic, or other plastic stock used for creating high quality signage.

READ MORE ❯

Quality Poster & Graphic Printing

We offer photographic quality printing for posters, graphics and signage at very competitive prices. Printing is available on a variety of substrates such as photo paper, polyester films, back-lit films, transparencies, vinyl, label or plastic stock.

READ MORE ❯

Related Display Products

Cable Suspended LED Light Pockets

LED Light Pockets for Windows

– incredibly bright, slim acrylic poster frame with glowing edges. It will make your window or wall displays to stand out.

Cable Suspended Acrylic Literature/Information Displays

Literature/Information Displays

– cable/rod suspended or wall mounted displays for brochures, catalogs, magazines and other promotional materials.

Versa-Module Aluminum Modular Display Stand

Modular Display Stands

– create an instant floor-standing presentation to display signs, posters, literature, large format graphics, or merchandise.