Nova Display Systems, Inc. | Copyright © 2000-2024 Nova Display Systems Inc. dba NDSI. All Rights Reserved. | Site Index
3mm Cable Display System / Components
- Introduction
- Features and Benefits
- Range of Applications
- Inspirational Photos
- Weight Bearing Information
- Materials and Finishes
- Performance and Safety
- Environmental Considerations
- Catalog Pages
- Architectural Specifications
- Installation Guides
Basic and Special Cable Fixing Kits
The 3mm Cable Display System is available in a variety of basic kit configurations, designed to accommodate ceiling-to-floor, wall-to-wall, or rail-to-rail setups. Each standard kit includes top-crimped cables, secure ceiling fixings, and bottom spring-loaded fixings with tensioners, making them perfect for traditional ceiling-to-floor displays or cabinet installations. The provided cables are 4 meters (13′ 1-1/2″) in length and can be easily adjusted or trimmed during the installation process. Should your project require it, we also offer kits with extended cable lengths of up to 8 meters (26′ 4″) or more, available upon request. Additionally, we provide optional adjustable angle fixings for top and bottom connections to facilitate installations on sloped or vaulted ceilings.
C300-2M
Ceiling-
Overhead
2M (6’ 5-3/4”)
Length
Overhead
2M (6’ 5-3/4”)
Length
CA4-3
Ceiling-
to-Floor
4M (13’ 1-1/2”)
Length
to-Floor
4M (13’ 1-1/2”)
Length
C301-4M
Ceiling-
to-Floor
4M (13’ 1-1/2”)
Length
to-Floor
4M (13’ 1-1/2”)
Length
C302-QFT
Track-Mount
w/Heavy-Duty Toggle
4M (13’ 1-1/2”)
Length
w/Heavy-Duty Toggle
4M (13’ 1-1/2”)
Length
C320-4M
Adjustable Angle
Top/Ceiling
2M (6’ 5-3/4”)
Length
Top/Ceiling
2M (6’ 5-3/4”)
Length
C340-4M
Adjustable Angle
Ceiling-to-Floor
4M (13’ 1-1/2”)
Length
Ceiling-to-Floor
4M (13’ 1-1/2”)
Length
C360-4M
Adjustable Angle
Top and Bottom
4M (13’ 1-1/2”)
Length
Top and Bottom
4M (13’ 1-1/2”)
Length
C390-4M
Wall-to-
Wall
4M (13’ 1-1/2”)
Length
Wall
4M (13’ 1-1/2”)
Length
Note: C320-4M, C340-4M, C360-4M, and C390-4M Cable Suspension Sets include Ball-Joint Swivel Coupling Fixings with 38mm (1-1/2″) Dia. Bases — Optional Base Supports in 50mm diameter are also available. Cable Projection from Wall — 65mm (2-1/2″). Cable Suspension Sets with longer cables or additional crimped cables up to 8 miter (26′ 4″) or more can be supplied at your request.
Specialized Accessories and Components
Optional Base Supports are compatible with C300-2M and C301-4M cable suspension sets only. Bases are available in 25mm (1”), 38mm (1-1/2”), and 50mm (2”) diameters. These bases can fit onto both ends of cable set — top fixing and bottom floor-tensioner. Use the CB-50 base support to suspend heavier applications (require mounting to studs).
Use to stabilize ceiling-to-floor suspended cable runs — not intended for use as a weight support structure. Standard wall projecting cable stabilizer comes in two sizes to accommodate for 23mm (7/8”) and 48mm (1-7/8”) spacing. Customizable kits use 6mm diameter rods that can be cut to any size — adjusted and shortened in place during installation.
Adjustable Angle Fixings come with ball-joint swivel coupling and 38mm (1-1/2”) or 50mm (2”) diameter base supports that can be adjusted to any angle. Compatible with C300-2M and C301-4M cable suspension sets only. Use with applications that require mounting the cable at an angle such as suspending from sloped ceilings (cathedral or vaulted) or wall-to-wall.
STANDARD ITEM CODES: C320-2M, C340-4M, C360-4M, KCB-38-ANGLE-BASE, KCB-50-ANGLE-BASE.
Standard and Multi-Position Supports — Panel and Shelf Applications
Supplied in a range of single and double-sided clamp supports for holding panels and shelves, top panel supports for hanging overhead signs, top/bottom supports for gripping onto front mounted panels, and multi-position swivel supports for holding angled presentations. Available in a few standard sizes to support 1/4”, 3/8” and 1/2” thick panels or shelves. Use multi-position swivel supports for applications that require an angled orientation. These fittings are adjustable to any angle and can be locked into position.
Top Clamp
Support
for Panels
Side Clamp
Support
for Panels
Support with
Stud-Cap
for Panels
Top/Bottom
Support
for Panels
Side Clamp
Support
for Shelves
Multi-Position
Clamp Support
for Panels/Shelves
Locking Support
for Drilled
Shelf
Support for
Drilled/Slotted
Shelf
Side-Grip Supports for Panels and Shelves
CG01-3
Side Support
Single
up to 7mm (1/4″)
Thick Panels
Single
up to 7mm (1/4″)
Thick Panels
CG02-3
Side Support
Double
up to 7mm (1/4″)
Thick Panels
Double
up to 7mm (1/4″)
Thick Panels
CP303
Side Support
Single
up to 10mm (3/8″)
Thick Panels
Single
up to 10mm (3/8″)
Thick Panels
CP304
Side Support
Double
up to 10mm (3/8″)
Thick Panels
Double
up to 10mm (3/8″)
Thick Panels
CG14-3
Side Support
Single
up to 12.5mm (1/2″)
Thick Panels
Single
up to 12.5mm (1/2″)
Thick Panels
CP307
Top/Overhead
Support
10mm (3/8′′)
Thick Panels
Support
10mm (3/8′′)
Thick Panels
CS303
Side Support
Single
up to 10mm (3/8″)
Thick Shelves
Single
up to 10mm (3/8″)
Thick Shelves
CS304
Side Support
Double
up to 10mm (3/8″)
Thick Shelves
Double
up to 10mm (3/8″)
Thick Shelves
CG15-3
Side Support
Single
up to 12.5mm (1/2″)
Thick Shelves
Single
up to 12.5mm (1/2″)
Thick Shelves
CS01-3
Support
for Drilled Shelf
up to 25mm (1″)
Thick Shelves
for Drilled Shelf
up to 25mm (1″)
Thick Shelves
Supports for Panels with Holes
Use with pre-drilled panels. Require panel hole size diameter of 6mm (15/64″) to accommodate for M4 threaded stud.
CS13-3
Support w/Stud
Single
up to 7mm (1/4″)
M4 Stud
Single
up to 7mm (1/4″)
M4 Stud
CS23-3
Support w/Stud
Double
up to 7mm (1/4″)
M4 Stud
Double
up to 7mm (1/4″)
M4 Stud
CS13-3/S-3/8
Support w/Stud
Single
up to 10mm (3/8″)
M4 Stud
Single
up to 10mm (3/8″)
M4 Stud
CS23-3/S-3/8
Support w/Stud
Double
up to 10mm (3/8″)
M4 Stud
Double
up to 10mm (3/8″)
M4 Stud
CS13-3/S-1/2
Support w/Stud
Single
up to 12mm (1/2″)
M4 Stud
Single
up to 12mm (1/2″)
M4 Stud
CS23-3/S-1/2
Support w/Stud
Double
up to 12mm (1/2″)
M4 Stud
Double
up to 12mm (1/2″)
M4 Stud
Multi-Position Supports for Panels/Shelves and Rods
Use for a variety of applications that require an angled placement or a custom orientation. Adjustable to any angle. Can be locked into position.
CG11-3
Multi-Position
Support Single
up to 7mm (1/4″)
Support Single
up to 7mm (1/4″)
CG21-3
Multi-Position
Support Double
up to 7mm (1/4″)
Support Double
up to 7mm (1/4″)
CG13-3
Multi-Position
Support Single
up to 10mm (3/8″)
Support Single
up to 10mm (3/8″)
CG23-3
Multi-Position
Support Double
up to 10mm (3/8″)
Support Double
up to 10mm (3/8″)
CS11-3
Multi-Position
Support Single
up to 25mm (1″)
Support Single
up to 25mm (1″)
CS21-3
Multi-Position
Support Double
up to 25mm (1″)
Support Double
up to 25mm (1″)
CG12-3
Multi-Position
Support Single
up to 10mm (3/8″)
Support Single
up to 10mm (3/8″)
CG22-3
Multi-Position
Support Double
up to 10mm (3/8″)
Support Double
up to 10mm (3/8″)
CS07-3
Multi-Position
Support for Rod
for 6mm Rods
Support for Rod
for 6mm Rods
Specialty Supports — Frame and Showcase Presentations
Use for mounting wood panels and shelves, display showcases, aluminum frames, hanging clothes rails, graphic holders, horizontal rods for banners/fabrics, picture frames, wine bottles, or any item fitted with P02 boss.
Support with Boss
for Wooden
Panel/Shelf
Support with Boss
for Graphic
Holder
Support with Boss
for Hanging
Rail
Support for
Aluminum
Frame
Hook Support
for Picture
Frame
Support for
6mm and 10mm
Horizontal Rods
Support for
Fixed or Adjustable
Rod
Rod Support
for Wooden
Shelf
Specialty Supports
CS03-3
Support Single
w/P02 Boss
for Wooden
Panels and Shelves
w/P02 Boss
for Wooden
Panels and Shelves
CS04-3
Support Double
w/P02 Boss
for Wooden
Panels and Shelves
w/P02 Boss
for Wooden
Panels and Shelves
P02
Boss
for Supports
use with
#10 Screw
for Supports
use with
#10 Screw
CS05-3
Support Single
for 6mm Rod
for Hanging
Horizontal Rods
for 6mm Rod
for Hanging
Horizontal Rods
CS06-3
Support Double
for 6mm Rod
for Hanging
Horizontal Rods
for 6mm Rod
for Hanging
Horizontal Rods
KCS03-3/CT01
Support Single
w/CT01 Toggle
for Aluminum
Frames
w/CT01 Toggle
for Aluminum
Frames
KCS04-3/CT01
Support Double
w/CT01 Toggle
for Aluminum
Frames
w/CT01 Toggle
for Aluminum
Frames
CS12-3
Picture
Hook/Support
for any
Hanging Item
Hook/Support
for any
Hanging Item
Rails/Tracks and Installation Accessories
Supplied in a range of components and accessories such as aluminum rails/tracks for standard ceiling-to-floor or wall-to-wall cable suspended applications, wall brackets, quick-fit brass toggles, power connectors and isolators, decorative support plates, etc. Tracks are available in 4, 6, or 8 feet length. Custom sizes are available upon request.
Rebate and Threshold
Channel for
Ceiling/Floor
Single or Double-
Sided Rail/Track
for Ceiling/Floor
Wall Brackets
for Cable/Rod
and Track Fixing
Rail/Track Toggles
for Cable/Rod
Suspensions
Graphic Holders
and Hanging
Rails
6-10mm Rods
for
Sundry Use
Heavy-Duty
Base Supports/
Wall Plugs
Replacement
Cable with Top
Crimp
Rails and Toggles
AC
Rebate Channel
for Ceilings
14.5mm (7/16”) x
19mm (3/4”) Section
for Ceilings
14.5mm (7/16”) x
19mm (3/4”) Section
ACT
Threshold Channel
for Floors
8mm (5/16”) x
38mm (1-1/2”) Section
for Floors
8mm (5/16”) x
38mm (1-1/2”) Section
PH1028
Single-Sided
Rail/Track
28mm (1-1/8”) x
19mm (3/4”) Section
Rail/Track
28mm (1-1/8”) x
19mm (3/4”) Section
PH1035
Double-Sided
Rail/Track
35mm (1-3/8”) x
19mm (3/4”) Section
Rail/Track
35mm (1-3/8”) x
19mm (3/4”) Section
PH1005
Double-Sided
Rail/Track
45mm (1-13/16") x
19mm (3/4”) Section
Rail/Track
45mm (1-13/16") x
19mm (3/4”) Section
MSB-25
Wall
Bracket
for Mounting
Double-Sided Rails
Bracket
for Mounting
Double-Sided Rails
MDB
Triangular
Wall Bracket
for Cable/Rod
Attachment
Wall Bracket
for Cable/Rod
Attachment
QFT/SS
Quick-Fit
Toggle
for Cable-to-Rail
Attachment
(heavy-duty)
Toggle
for Cable-to-Rail
Attachment
(heavy-duty)
PA8
Toggle
End-Fit
for Cable-to-Rail
Attachment
End-Fit
for Cable-to-Rail
Attachment
PA9
Toggle
Side-Fit
for Cable-to-Rail
Attachment
Side-Fit
for Cable-to-Rail
Attachment
Note: Aluminum rails are offered in lengths of 4, 6, or 8 feet, with custom sizes available upon request. For installation, rail/track systems must be securely mounted to a solid structure or blocking. This includes attaching tracks to ceiling struts, structures above the ceiling line, or wall studs. The spacing for anchoring depends on the track’s sectional size, requiring anchors at least every 12 inches for ceiling installations and every 32 inches for wall applications. The overall durability and capacity of the assembly are contingent upon the secure attachment of the anchors to the ceiling or wall. The total weight the display can support is determined by both the strength of the individual anchors and the number of mounting points used.
Other Accessories
BC10-3
Replacement Cable
w/Top Crimp
10M (32′-8′′)
Long
w/Top Crimp
10M (32′-8′′)
Long
R500P
6mm Rod
Non-Threaded
0.5M (1′ 7-11/16′′)
Long
Non-Threaded
0.5M (1′ 7-11/16′′)
Long
R1000P
6mm Rod
Non-Threaded
1.0M (3′ 3-3/8′′)
Long
Non-Threaded
1.0M (3′ 3-3/8′′)
Long
HRAG400R
Graphic Holder
w/Gripper
up to 80 points
thick (3/32′′, 2 mm)
w/Gripper
up to 80 points
thick (3/32′′, 2 mm)
HR32C
Clothing
Hanging Rail
32mm (1-1/4”)
Diameter
Hanging Rail
32mm (1-1/4”)
Diameter
CB-25
Base
Support
25mm (1′′)
Diameter
Support
25mm (1′′)
Diameter
CB-38
Base
Support
38mm (1-1/2′′)
Diameter
Support
38mm (1-1/2′′)
Diameter
CB-50
Heavy-Duty
Base Support
50mm (2′′)
Diameter
Base Support
50mm (2′′)
Diameter
HDS
Heavy-Duty
Base Support
50mm (2′′)
Diameter
Base Support
50mm (2′′)
Diameter
P01
Decorative
Support Plate
50mm (2′′)
Diameter
Support Plate
50mm (2′′)
Diameter
Note: HDS Heavy-Duty Base Support is compatible with CA4-3 cable suspension set and can be used to support heavier loads (*use with the top fixing only — can not be mounted at the bottom of cable). Use CB-Series Optional Base Supports with C300-2M and C301-4M cable suspension sets by replacing the CB-ST standard base support included with each set. CB-Series Base Supports can be attached at the top and bottom of these cable sets.
Use the info/poster display accessories to display information, certificates, photos, posters, brochures, magazines, and other promotional material. Cable/rod suspended holders are relatively quick and easy to install and update… Read More ❯
Acrylic Easy Access Info/Poster Holders
Acrylic Single/Multi-Pocket Magazine Holders
A wide range of acrylic resin sheets — available in clear, non-glare, frost, color, textured, and natural decors for use with cable/rod suspension systems. Use to create graphic panels, privacy screens, and partitions… Read More ❯
Acrylic Frameless Panels for Posters and Graphics
Resin Panels for Partitions and Screens
Shelves and showcases are made of clear, frost, or satinice color acrylic and are intended for use in a variety of cable/rod suspended applications. Use to display collectibles, promotional products, or lightweight merchandise… Read More ❯
Acrylic and Tempered Glass Shelves
Open/Locking Acrylic Showcase Displays
Display Solutions & Ideas
Easy Access Poster Displays
Cable suspended poster information displays for walls and windows. Provides a quick and easy way to change information.
Suspended/Floating Shelves
Ideal for displaying collectibles, merchandise and promotional products in windows, inside glass cabinets, or interiors.
Graphic Panels and Banners
Cable/rod suspended graphic displays are an excellent addition to any retail store, showroom, lobby, or corporate office.
Decorative Screens and Dividers
Cable/rod suspended architectural screens, decorative wall panels, and room dividers available in a wide range of finishes.