Aluminum Modular Display Systems / Assembly Parts
Modular System includes a variety of finishing accessories and assembly parts, such as plastic and aluminum end caps, floor levelers, floor bases, insert glides, side legs, mounting plates for table tops, panel clamp supports, shelf brackets, hanging rail supports, standard CBX connectors, in-line connectors, miter connectors, hinges, and decorative connecting nodes. They ensure quick and easy assembly of structures and enable for greater flexibility in design.
End Caps, Inserts & Floor Bases
The modular display system includes a variety of accessories such as end caps, floor levelers, floor bases, insert glides, side legs, and mounting plates for table tops. These components ensure quick and easy assembly and finishing of aluminum structures and enable for greater flexibility in design.
370-121
Aluminum End Cap for PX6033
370-111
Aluminum End Cap for PX8000
370-180
Aluminum End Cap for MR Series
370-133
Aluminum End Cap for TR Series
370-190
Aluminum End Cap for VR76
370-139
Aluminum End Cap for VR108
370-113
Aluminum End Cap for PX4026
370-108
Aluminum End Cap for PX4032
370-175
Aluminum End Cap for VS45
370-177
Aluminum End Cap for VS4576
370-178
Aluminum End Cap for VS45108
370-195
Aluminum End Cap for VS76
390-121
Plastic End Cap for PX6033
390-111
Plastic End Cap for PX8000
370-180 TH
Threaded Stainless Steel Cap for MR Series
390-108
Plastic End Cap for PX4032
370-126
Aluminum End Cap for PH1035
370-106
Aluminum End Cap for PH1038
370-104
Aluminum End Cap for PH1005
370-103
Aluminum End Cap for PH1003B
390-127
Plastic End Cap for PH1028
390-116
Plastic End Cap for PH1005
368-121
Floor Leveler Insert Set for PX6033
368-107
Floor Leveler Insert Set for P5000
368-108
Floor Leveler Insert Set for MR Series
368-111
Floor Leveler Insert Set for PX8000
368-140
Floor Leveler Insert Set for TR Series
368-195
Floor Leveler Insert Set for VR/VS76
368-138
Floor Leveler Insert Set for VR/VS108
652-108
Insert Block for MR Series
652-104
Insert Block for TR Series
652-111
Insert Block for PX8000
652-195
Insert Block for VR/VS76
652-138
Insert Block for VR108/188
421-02
Mounting Plate for Table Top
625-RND 12
12″ Dia. Round Floor Base
625-RND 15
15″ Dia. Round Floor Base
625-SQ12
12″ Square Floor Base
625-SQ15
15″ Square Floor Base
625-RECT
18″ x 4″ Rectangle Floor Base
625-TRI
15″ Triangle Floor Base
216-LEV
Knuckle Joint with Leveler for PX3001
216-CAST
Knuckle Joint with Casters for PX3001
216-02
Knuckle Joint 2-Way for PX3001
216-01
Knuckle Joint 3-Way for PX3001
Connectors & Hinges
Modular display system includes a variety of connectors such as standard CBX connectors, in-line horizontal/vertical connectors, miter connectors, hinges, and decorative nodes. For entire selection visit our online store.
320-35
CBX 35 Connector for PH1028
320-42
CBX 42 Connector for PH1005
320-15
CBX 15 Connector for PX4032
320-44
CBX 44 Connector for VR/VS45
290-42F30
Miter Connector for PH1005
648-104
In-line Connector for PH1005
648-175
In-line Connector for VS45
PS2
Toggle / Joiner
403-01
Inside Corner Plate
Panel & Shelf Supports
Modular display system includes various other accessories used for supporting graphic panels, product shelving and merchandising. Extrusions have at least one channel on the full length of the profile – this enables insertion of panels and other accessories, such as shelf brackets, hinges, hanging rail supports, panel clamp supports, connectors, cable and rod fittings, standoff mounts, etc.
404-00
CH4 Support for 12mm (1/2”) Shelf
404-45
CH4 Support for 12mm (1/2”) Shelf at 45°
404-90
CH4 Support for 12mm (1/2”) Panel
412-01
Support for Hanging Rail
214-01
“L” Shelf Bracket w/Rubber Bumper
631-01
Top Support for 19mm (3/4”) Shelf
631-02
Top Support for 12mm (1/2”) Shelf
504-B02
200mm (7-7/8”) Long Shelf Bracket
523-D01R/L
300mm (11-13/16”) Long Shelf Bracket
524-D01R/L
300mm (11-13/16”) Long Shelf Bracket
Monitor Mounts
Available in two standard sizes and design to hold one TV/Monitor up to 150 lbs weight capacity. The holes pattern for mounting should conform to international standard VESA specification: 75mm, 100mm, 200mm.
Supports for Shelves & Graphic Panels
Various accessories for supporting graphic panels, product shelves and custom display cases are available. Extrusions have at least one channel on the full length of the profile — this enables insertion of vertical panels and accessories such as shelf brackets, hinges, hanging rail supports, panel clamp supports, connectors, cable and rod fittings, standoff mounts, etc.
Levelers & Casters
Accessories such as leveler-inserts, insert glides and casters are used with our vertical extrusions to provide floor support. Some extrusions and profile set-ups may require drilling, others can use standard inserts without additional preparation. Use with modular stands, showcases, kiosks, workstations, or cubicles.
Display Solutions & Ideas
Modular Display Stands
– create an instant floor-standing presentation to display signs, posters, literature, large format graphics, or merchandise.
Modular Partitions & Dividers
– a modern space dividing solution for creating privacy wherever needed, it can be floor-standing or span from floor to ceiling.
Modular Display Stands & Exhibits
– we build custom and pre-fabricated modular and portable display stands, trade show booths and kiosks from your specifications.